Potential exists for corn ear molds this year

 Resize text         Printer-friendly version of this article Printer-friendly version of this article

A growing season characterized by weather extremes, leading to crop stress during flowering and delayed maturity, has created favorable conditions for classic corn ear molds. The environment will become increasingly ideal for ear molds if the weather brings cooler temperatures and periodic rains as we head into harvest. In addition, drought stress and insect injury to the crop provide an avenue for fungi to enter, causing ear molds to establish and spread.

“The carryover of ear mold inoculum from last year’s drought environment is likely minimal; however, growers with a history of molds should carefully scout their fields,” says Bill Dolezal, DuPont Pioneer plant pathology research fellow. “While not significant, we have heard reports of ear molds in Indiana and Illinois, as well as Missouri and Tennessee, this year. Ear molds reduce yield potential, grain quality and feed value.”

While scouting, it is important to identify molds and determine if mycotoxins are present. If mold presence is greater than 10,000 cfu/gram and is of the Aspergillus, Fusarium, Gibberella or Penicillium strains, a mycotoxin screening should be completed. Many crop insurance policies require that you contact your crop insurance agent as samples must be pulled from the field by a loss adjuster prior to the grain being placed in storage. The representative sample must be sent to university plant pathology labs for proper mycotoxin screening and identification.

If 10 percent or more of the ears in the field have a significant amount of mold present on greater than 25 percent of the ear, harvest as soon as possible. The best way to prevent further growth and toxin development is to harvest at or above 20 percent moisture and then dry the corn to 15 percent moisture or less.

When harvesting, be sure to adjust your combine to minimize kernel damage and remove the lightest kernels. Broken kernels often have a higher likelihood of toxin development.

Proper grain drying and storage are critical to minimize further proliferation of existing molds. Grain should be dried to less than 15 percent moisture and cooled below 50 degrees as quickly as possible following harvest. Prior to storage, clean grain to remove any infected kernels, cobs and fines.

If possible, store infected grain separately to avoid putting the entire bin at risk for contamination. Grain should be stored in cool temperatures, preferably around 30 degrees. To maintain condition, regularly monitor and check grain in storage for temperature, moisture and insects. After handling infected grain, thoroughly clean drying bins and equipment to avoid further contamination.

Source: DuPont Pioneer



Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


WinPig.Net

WinPig.Net is the newest management system from AgroSoft. This new program retains the user-friendliness of its predecessor while adding ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Generate Leads